Browse

Laser Sand System Complete

$ 0.00
  • $ 0.00|

Laser Series Complete Sand Filter & Pump System

  • 14", 16", 19", 22.5" and 25" models.
  • Upper distribution system integrated into the dial valve and engineered to direct water evenly across the entire surface of the sand - up to 25 gpm/sq. ft. without sand migration or channeling.
  • Non-Corrosive resin clamp for simple installation and service of dial valve and filter components.
  • 7-way dial valve with "sight glass", automatic air-relief and pressure gauge. (Filter, Backwash, Rinse, Whirlpool, Drain, Test, Winterize)
  • 14" laser models are avaiable with 5-way valve.
  • Underdrain with "side-slotted" laterals draws water evenly across the full diameter of the sand bed for higher flows, better filtration, longer cycles and more efficient backwashing. Features heavy-duty, freeze resistant hub and easy service "Snap-fit" laterals.
  • Deep, high capacity sand bed carries more debris and extends filter cycles.
  • Bottom drain for winterizing and draining.
  • LR Series pump with Ring-Lok access to strainer basket. Patented air cool heat sink allows pump to run dry without damage to shaft seal. Unconditional Two-Year Warranty against seal failure.
  • 6 ft. cord pumps feature 3-prong grounded plugs.
  • 3 ft cord pumps feature a NEC twist lock plug (UL listed).
  • Injection molded, high quality platform base provides a non-corrosive elevated surface for sturdy support of pump and filter.
  • Maximum water temperature 104° F
    • 14" model = 90° F
    • 16" model = 95° F

PERFORMANCE

Model No. Area Sq. Ft. Flow Rate GPM 6 Hours
Gallons
8 Hours
Gallons
Sand (Lbs.) Operating Pressure PSI
L140C-5
14"
1.02
30
10,8000
120
90
L160C-7
1.33
33
12,000
16,000
140
35
L192C-7
1.87
46
16,8000
22,400
200
35
L225C-7
2.64
66
23,8000
31,700
250
50

NOTE: Flow Rate - 25 GPM/sq. ft.. Actual system flow rate is dependeant on pump selection and plumbing.. Recommended sand: #20 silicia sand.

115V SYSTEM ~ 3' CORD WITH HEC TWIST-LOCK PLUG

Model No. Item No. Hertz HP Full Load Amps Service Factor
L140C-5-S7LR3-HK6
9408-4940
60
3/4
9.8
1.0
L160C-7-S1LR3-HK6
9408-4950
60
1
9.8
1.0
L192C-7-S15LR3-HK6
9408-4951
60
1 1/2
12.4
1.0

115V SYSTEM ~ 6' CORD WITH 3 PRONG GROUNDED PLUG

Model No. Item No. Hertz HP Full Load Amps Service Factor
L160C-7-S1LR6-HK6
9408-4953
60
1
9.8
1.0
L192C-7-S1LR6-HK6
9408-4958
60
1
9.8
1.0
L192C-7-S15LR6-HK6
9408-4963
60
1 1/2
12.4
1.0
L225C-7-S15LR6-HK6
9408-4968
60
1 1/2
12.4
1.0
  • There is NO return on any item(s) that have been installed.
  • There is NO return on any electrical items including but not limited to circuit boards, topside controls or heaters.
  • All uninstalled item(s) may be returned to us within 30 days of delivery for  refund unless otherwise noted as Not Returnable.
  • Item(s) must not have been installed, in the state you received them and in the original packaging (some items have a security tag)
  • We do not credit shipping charges.
  • 25% restocking on all returns within 30 days.
  • No returns after 30 days.
    Please contact us for an (RGA) Returned Goods Authorization prior to returning your item(s).
    email: help@uspartscenter.com

    Customer Service Team
    US Parts Center

    Please contact us for an (RGA) Returned Goods Authorization prior to returning  your item(s).
    email:help@uspartscenter.com

     

    Laser Sand System Complete

    $ 0.00

    Laser Sand System Complete

    $ 0.00

    Vendor Jacuzzi Brothers
    SKU 7820
    Type Pool Parts
    Description

    Laser Series Complete Sand Filter & Pump System

    • 14", 16", 19", 22.5" and 25" models.
    • Upper distribution system integrated into the dial valve and engineered to direct water evenly across the entire surface of the sand - up to 25 gpm/sq. ft. without sand migration or channeling.
    • Non-Corrosive resin clamp for simple installation and service of dial valve and filter components.
    • 7-way dial valve with "sight glass", automatic air-relief and pressure gauge. (Filter, Backwash, Rinse, Whirlpool, Drain, Test, Winterize)
    • 14" laser models are avaiable with 5-way valve.
    • Underdrain with "side-slotted" laterals draws water evenly across the full diameter of the sand bed for higher flows, better filtration, longer cycles and more efficient backwashing. Features heavy-duty, freeze resistant hub and easy service "Snap-fit" laterals.
    • Deep, high capacity sand bed carries more debris and extends filter cycles.
    • Bottom drain for winterizing and draining.
    • LR Series pump with Ring-Lok access to strainer basket. Patented air cool heat sink allows pump to run dry without damage to shaft seal. Unconditional Two-Year Warranty against seal failure.
    • 6 ft. cord pumps feature 3-prong grounded plugs.
    • 3 ft cord pumps feature a NEC twist lock plug (UL listed).
    • Injection molded, high quality platform base provides a non-corrosive elevated surface for sturdy support of pump and filter.
    • Maximum water temperature 104° F
      • 14" model = 90° F
      • 16" model = 95° F

    PERFORMANCE

    Model No. Area Sq. Ft. Flow Rate GPM 6 Hours
    Gallons
    8 Hours
    Gallons
    Sand (Lbs.) Operating Pressure PSI
    L140C-5
    14"
    1.02
    30
    10,8000
    120
    90
    L160C-7
    1.33
    33
    12,000
    16,000
    140
    35
    L192C-7
    1.87
    46
    16,8000
    22,400
    200
    35
    L225C-7
    2.64
    66
    23,8000
    31,700
    250
    50

    NOTE: Flow Rate - 25 GPM/sq. ft.. Actual system flow rate is dependeant on pump selection and plumbing.. Recommended sand: #20 silicia sand.

    115V SYSTEM ~ 3' CORD WITH HEC TWIST-LOCK PLUG

    Model No. Item No. Hertz HP Full Load Amps Service Factor
    L140C-5-S7LR3-HK6
    9408-4940
    60
    3/4
    9.8
    1.0
    L160C-7-S1LR3-HK6
    9408-4950
    60
    1
    9.8
    1.0
    L192C-7-S15LR3-HK6
    9408-4951
    60
    1 1/2
    12.4
    1.0

    115V SYSTEM ~ 6' CORD WITH 3 PRONG GROUNDED PLUG

    Model No. Item No. Hertz HP Full Load Amps Service Factor
    L160C-7-S1LR6-HK6
    9408-4953
    60
    1
    9.8
    1.0
    L192C-7-S1LR6-HK6
    9408-4958
    60
    1
    9.8
    1.0
    L192C-7-S15LR6-HK6
    9408-4963
    60
    1 1/2
    12.4
    1.0
    L225C-7-S15LR6-HK6
    9408-4968
    60
    1 1/2
    12.4
    1.0
    Reviews
    Return Policy
    • There is NO return on any item(s) that have been installed.
    • There is NO return on any electrical items including but not limited to circuit boards, topside controls or heaters.
    • All uninstalled item(s) may be returned to us within 30 days of delivery for  refund unless otherwise noted as Not Returnable.
    • Item(s) must not have been installed, in the state you received them and in the original packaging (some items have a security tag)
    • We do not credit shipping charges.
    • 25% restocking on all returns within 30 days.
    • No returns after 30 days.
      Please contact us for an (RGA) Returned Goods Authorization prior to returning your item(s).
      email: help@uspartscenter.com
      Contact Us

      Customer Service Team
      US Parts Center

      Please contact us for an (RGA) Returned Goods Authorization prior to returning  your item(s).
      email:help@uspartscenter.com